Arm automatic control
Click Arm, then watch the selected upwind hazers follow the rotating wind.
HazeVaneView source Interactive browser simulation
Take the canvas for a spin.
This is the actual HazeVane operator interface connected to a deterministic, browser-only simulator. Explore wind, geometry, fixture selection, Arm, Blackout, and console takeover without touching a controller or sending DMX.
Simulation only · No network output · Resets when reloaded
Four useful experiments
See the decision change.
Move the site
Select Stage, FOH, Coverage, or a hazer and drag directly on the infinite canvas.
Drive the wind
Open Settings → Local test harness. Disable auto-rotate, then choose a bearing and speed.
Try safety states
Assert Blackout, run a bounded hazer test while disarmed, or enable the console emulator.
The interface is real. The hardware boundary is simulated.
Canvas behavior, configuration editing, units, autosave flow, inspectors, status presentation, and operator controls come from the production web client. Wind samples, selection status, and sACN state are generated inside this tab. No browser action can reach a HazeVane appliance or show network.